Enhance Your Car Interior with Music Sync RGB Ambient Lighting Kit

[Product Dxplaination]: The working voltage of the lamp strip in the car is DC 12V, low heat and low consumption, equipped with on-board charging appliance (with safety wire).
The installation can be completed according to the instruction manual and through the tools provided.Scope of application:The product is very simple to use and is suitable for almost all models. Can be used in RV, camper, trailer, car, truck, SUV, all-terrain vehicle, boat, golf cart and so on. Come and add a more beautiful atmosphere to your car!Installation steps:
1. Determine where you want to install it in your car.
2. Measure the length of the parts to be installed and then cut the same length on the fiber optics and the transparent tube.
3. Beginning with step 2, the cut fiber passes through a transparent tube.
4. Install a transparent tube with fiber optics at the place where it needs to be installed (use the included tool to pry open the narrow hole in the place to be fixed).
5. Connect the light strip to the transparent tube installed in step 4.
6. For other locations in the car that need to be installed, simply repeat the above steps.
7. Place the wires and LED lights in place (can be hidden in the center console, under the foot pedal, or elsewhere).
8. Connect the lighter / USB to the controller and start the power.！！
NOTE:
1. If the fiber and transparent pipe are installed at a point of sharpness, try to minimize the wear of the fiber.
2. If the length of a section of fiber used during the installation is longer, it is recommended to install a light band (RGB LED beads) at both ends of the fiber to increase brightness.App Connection Steps:
1. Scan the 2-D code on the controller Download Apage
2. Turn on your phone\'s Bluetooth.
3. Turn on the light band.
4. Open the app and connect the lights (connect in this app).