• Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6

Racing Stripe Vinyl Decal Kit – Car Hood & Body Stickers with Mirror Decals

From R373.83

  • Color Name:

  • Ships From:

Buy With Confidence

100% Safe Payment


;

  • Description

    Enhance the look of your car with this waterproof Racing Stripe Vinyl Decal Kit. Easy to install and sunproof, these car stickers offer a professional touch to your vehicle.

    Condition: 100% Brand New Fitment: Universal for Cars Suitable Place: Car Body Material: PET Professional Car Stickers Feature:, Sunproof, Good Adhesive, Easy To Install, Just Peel And Paste, They Will Not Destroy Color Or Surface It Pasted On Size/Colors: As PicturesAbout installation: Installation method of large car stickers (wet Decal method, also applicable to small car stickers installation):
    1.Prep tools: rag, sprinkler, dish soap, scraper or credit card
    2.
    Watering can: put water and dishwashing liquid into a shaker (the dishwashing liquid has a lubricating effect, only a small amount is required), set aside
    3.Clean the body and spray water evenly on the body to be installed.Tear off the backing paper on the back of the Decal, and spray the glued side with water evenly|.
    4.
    Lightly attach the car Decal to the surface of the car body and adjust it to a suitable position (at this time, due to the lubricating effect of detergent water, the viscosity is reduced, and it can be adjusted at will)
    5.After determining the position, take the center of the Decal as the origin, and use the scraper to scrape evenly in the surrounding direction.The purpose is to scrape the water out, so as not to leave air bubbles; gently lift, re-smooth and continue to scrape|.
    6.
    Check the air bubbles again, make sure that all the air bubbles are scraped out, let it stand for 1~2 hours to let the moisture in the Decal dry, and then tear off the transfer film on the surface of the Decal
    7.Use a utility knife to make a cut on the door and sewing, and stick to the inside|.8.Done.Do not wash your car within 72 hours
    ▲Note:
    1.When tearing off the backing paper, the backing paper should be facing up and the transfer film should be facing down.
    There may be scattered parts stickers on the backing paper, which can be pressed onto the transfer film with your fingers; 2. After the backing paper has been torn off, avoid sticking the stickers together;3. Please do not wash the car within 72 hours after it is pasted, because the Decal has not been completely pasted within this time, and the high-pressure water column of the car wash will cause it to fall off; 4.

Follow us on:

Subscribe to our Newsletter
Please wait...